Read-Only Forum Archive
PetPitcher Forum  

Go Back   PetPitcher Forum > GENERAL CARNIVOROUS PLANTS DISCUSSION > Projects

Projects Tips, suggestions and discussion on member's gardening projects



Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 18th September 2008, 04:03 AM
adilevi424 adilevi424 is offline
Full Member
 
Join Date: Thu Jul 2008
Location: Israel
Posts: 73
Default my setups

few versions of my old setup(I'm going to dismantle it and replacing it with a new terrarium-sth like the one at the end of the thread)

my first




the second one i built (bigger one)
I am putting here hose for the fogger



after i finished it looked like that





I added two of the last setup so I'l have bigger space for the new one.
this is the last one (I must say ,I dont reccomend this kind of setup for nepenthes -it's to small,once they get big you have a problem).





Reply With Quote
  #2  
Old 18th September 2008, 04:32 AM
adilevi424 adilevi424 is offline
Full Member
 
Join Date: Thu Jul 2008
Location: Israel
Posts: 73
Default Re: my setups

This is my new project(ultra highland setup)
I am going to build the same without the cooling system for the rest of my planets( for replacing my grow chamber)
The building
I used polystyrene for the frame.




that's the results.
after that I went to the carpenter and made the tracks for the glass.
I bought the glass in the measurements I needed.
and finito ( the terrarium measurements are 110 L\70 W\100 H)


now for the cooling system
my uncle helped me to build this(basically we build a refrigerator)
the parts left to right(compressor \fan\not sure what the name{heat sink or cooling ribs}





cooling plate


at the end



the cold plate


the one thing left is
1.to get my planets (hopefully this weekend)
2.need to buy lights(if you have recommendation pleas advice)

Last edited by adilevi424; 25th September 2008 at 07:23 PM.
Reply With Quote
  #3  
Old 18th September 2008, 12:59 PM
TS TS is offline
Pioneer
Senior Global Moderator
 
Join Date: Fri Dec 2006
Location: Kuala Lumpur
Posts: 1,143
Default Re: my setups

Woah Adi,
Look like a big project!!! One question: can the polystylene support the heavy glass?
It's interesting to see it work! Keep us updated Adi, thanks for the thread.
Reply With Quote
  #4  
Old 18th September 2008, 03:44 PM
adilevi424 adilevi424 is offline
Full Member
 
Join Date: Thu Jul 2008
Location: Israel
Posts: 73
Default Re: my setups

TS
Quote:
Originally Posted by TS View Post
Woah Adi,
Look like a big project!!! One question: can the polystylene support the heavy glass?
It's interesting to see it work! Keep us updated Adi, thanks for the thread.
the polystyrene his in high density and his width is 5 cm
so he can hold the weight.
david
Quote:
In the first picture, on the right of the grow chamber, is that a fogger? And you use hose to channel the humid air into the chamber? Looks cool.
yes it is,I used ac hose(the one that drains the water)

Quote:
How will you be placing the lightings? Hung from the ceiling or on top of the glass?
I have a problem with this (if you look close at the pictures with the terrarium ,you will see that the ceiling have a slope(hope its the right word) ,so I have only 40 cm free space above the terrarium.
what mh do you recommend 250 or 400 w
my concern it will fracture the glass because of the heat,so I will might putt 4 t5 lights of 55 w(what do you think about this lighting setup)?
Tarence
I don't have vfts or sundews right now.
I am getting my highland nep this week ,hope they will survive the trip.
Reply With Quote
  #5  
Old 18th September 2008, 03:48 PM
Aliamyz's Avatar
Aliamyz Aliamyz is offline
Full Member
 
Join Date: Thu May 2008
Location: Ipoh
Posts: 1,368
Default Re: my setups

Nice setup Adi,
Hope your plants will arrive safely!
Reply With Quote
  #6  
Old 18th September 2008, 08:41 PM
kentosaurs's Avatar
kentosaurs kentosaurs is offline
Full Member
 
Join Date: Thu Jul 2008
Location: Kuala Lumpur,Kepong
Posts: 2,434
Default Re: my setups

Hi Adi,

Nice setup....Whats the sarrcenia species on the 4th picture on the top row of your rack??????

Ken
Reply With Quote
  #7  
Old 18th September 2008, 10:04 PM
David's Avatar
David David is offline
Administrator
 
Join Date: Tue Dec 2006
Location: Kuala Lumpur, Malaysia
Posts: 5,047
Default Re: my setups

Quote:
Originally Posted by adilevi424 View Post
I have a problem with this (if you look close at the pictures with the terrarium ,you will see that the ceiling have a slope(hope its the right word) ,so I have only 40 cm free space above the terrarium.
what mh do you recommend 250 or 400 w
my concern it will fracture the glass because of the heat,so I will might putt 4 t5 lights of 55 w(what do you think about this lighting setup)?
You're right, MH can get really hot and that 40cm free space might not be enough space. Might cause the glass to fracture. Hmm... Or you can place a table fan to blow across the top glass and the MH to remove the heat from the lighting? I'm just worried that the distance between the lighting from the plants is a little too far if you use T5. Maybe place more than 4 T5, but I think you'll have to test it through trial and error.
__________________
Plant Database - Picture Gallery - Little Shop Of Horrors

Treat the earth well. It was not given to you by your parents. It was loaned to you by your children. - A Kenyan Proverb
Reply With Quote
  #8  
Old 19th September 2008, 04:55 AM
adilevi424 adilevi424 is offline
Full Member
 
Join Date: Thu Jul 2008
Location: Israel
Posts: 73
Default Re: my setups

thanx I boght mh 250 W .
I will test it and will upload some pictures of the all setup
Reply With Quote
  #9  
Old 18th September 2008, 01:37 PM
David's Avatar
David David is offline
Administrator
 
Join Date: Tue Dec 2006
Location: Kuala Lumpur, Malaysia
Posts: 5,047
Default

I love to see people's projects. So interesting.

In the first picture, on the right of the grow chamber, is that a humifyer? And you use hose to channel the humid air into the chamber? Looks cool.

I think I'm gonna start looking for an old refrigerator compressor. You give me hope that this can be done and it looks like something that I can afford. I've always wanted to grow highlander such as N. macfarlanei, N. vilosa, N. burbidgeae, N. rajah, N. veitchii (highland), N. ramispina, N. sanguinea, etc. No doubt we can still grow N. sanguinea and maybe N. ramispina in lowland conditions but they will not reach their full potential. I want huge gigantic pitchers!

Hmm, if I build this like how you do it, I might need to build a wooden frame for the sides and back or else my son will be picking on the polysterine until there is a hole in it. He's already doing it to the piece of polysterine at the bottom of my glass terrarium.

TS,

I think the polysterine can hold the weight. It looks quite thick. Only worry is if somebody knock hard on the polysterine and break it. That might give way to the glass above.

Adi,

How will you be placing the lightings? Hung from the ceiling or on top of the glass?

Quote:
Originally Posted by adilevi424 View Post
2.need to buy lights(if you have recommendation pleas advice)
Looking at the height of your set up, I think the plants would be about 30 inches from the lightings? My recommendation would be to get metal halide.
__________________
Plant Database - Picture Gallery - Little Shop Of Horrors

Treat the earth well. It was not given to you by your parents. It was loaned to you by your children. - A Kenyan Proverb
Reply With Quote
  #10  
Old 18th September 2008, 01:53 PM
Tarence Tarence is offline
Advisor
 
Join Date: Mon Apr 2007
Location: Kuala Lumpur, Malaysia
Posts: 1,729
Default Re: my setups

hi Adi

thx for sharing with us your project...very interesting. i see sarracenias, a ping, some neps, what else is there ? i can almost make out a cobra lily. are there any vfts or sundews ?

David, if you try it, just build one tier so that your highland neps potentially can have a huge happy place to grow. Lets see those highland neps pitchering in your condo man.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +9. The time now is 08:27 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Site by David Tan, Founder and Administrator of petpitcher.net and forum.petpitcher.net