Read-Only Forum Archive
PetPitcher Forum  

Go Back   PetPitcher Forum > GENERAL CARNIVOROUS PLANTS DISCUSSION > Projects

Projects Tips, suggestions and discussion on member's gardening projects



 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 2nd July 2008, 06:24 PM
bactrus bactrus is offline
Administrator
 
Join Date: Wed Sep 2007
Location: Penang, Malaysia
Posts: 1,186
Default harris: Policarbonate for shading (Read 265 times)

harris
New Member

member is offline





Joined: Feb 2008
Gender: Male
Posts: 36
Location: Nibong Tebal
Policarbonate for shading
« Thread Started on 25 Feb, 2008, 13:07 »Hi guys,

Currently planning to build a shadehouse for my new home.
I usually see people using black netting as a shade but the contractor suggest that I use translucent polycarbonate because it will block up to 50% of rays.

Has anyone see anybody using this polycarbonate before?
Link to Post - Back to Top LoggedThere is always room for another one...tarence
Global Moderator

member is offline





Joined: Apr 2007
Gender: Male
Posts: 1,523
Location: Bandar Kinrara , Puchong
Re: Policarbonate for shading
« Reply #1 on 25 Feb, 2008, 13:16 »try looking at hongrui`s post titled `crude rainshelter for drosera` under this topic. it works for him & should serve you well. Link to Post - Back to Top Loggedharris
New Member

member is offline





Joined: Feb 2008
Gender: Male
Posts: 36
Location: Nibong Tebal
Re: Policarbonate for shading
« Reply #2 on 25 Feb, 2008, 13:23 »thanks tarence Link to Post - Back to Top LoggedThere is always room for another one...tarence
Global Moderator

member is offline





Joined: Apr 2007
Gender: Male
Posts: 1,523
Location: Bandar Kinrara , Puchong
Re: Policarbonate for shading
« Reply #3 on 25 Feb, 2008, 14:06 »you are most welcomed harris « Last Edit: 25 Feb, 2008, 14:07 by tarence »Link to Post - Back to Top Loggedatmccmn
Advisor - Tillandsia

member is offline





Joined: May 2007
Gender: Male
Posts: 286
Location: Penang, Malaysia
Re: Policarbonate for shading
« Reply #4 on 25 Feb, 2008, 22:51 »Harris,

Yes polycarbonate did take certain percentage of lights away. But this material has a setback. It couldnt take away the heat. Just for information purpose only.

Cheers,
AT
Link to Post - Back to Top Loggedharris
New Member

member is offline





Joined: Feb 2008
Gender: Male
Posts: 36
Location: Nibong Tebal
Re: Policarbonate for shading
« Reply #5 on 26 Feb, 2008, 7:44 »Thanks AT,

In that case I'll put on some netting together with the poly.
Link to Post - Back to Top LoggedThere is always room for another one...David
Administrator

member is offline





Joined: Dec 2006
Gender: Male
Posts: 2,326
Location: Kuala Lumpur
Re: Policarbonate for shading
« Reply #6 on 26 Feb, 2008, 9:44 »Hi Harris,

Just my view on this. I agree with atmccmn that heat might be a problem if you use polycarbonate. Not only that you've got to wash it often or dust and dirt will accumulate and block out more of the sun.

Since you live in Malaysia just like me, why not use shade cloth and let nature take care of your plants? I would suggest 50% shade cloth. I think shadecloth is also cheaper.
Link to Post - Back to Top LoggedMy Wantlisttarence
Global Moderator

member is offline





Joined: Apr 2007
Gender: Male
Posts: 1,523
Location: Bandar Kinrara , Puchong
Re: Policarbonate for shading
« Reply #7 on 26 Feb, 2008, 10:47 »shade cloth s/be ok if you are only having neps but if you are planning to have droseras in the future, then polycarbonate will be much better as droseras need as much sun as they can get while being protected from raindrops. Link to Post - Back to Top Loggedjonathan
Senior Member

member is offline





Joined: May 2007
Gender: Male
Posts: 357
Location: sg buloh
Re: Policarbonate for shading
« Reply #8 on 26 Feb, 2008, 11:24 »
Hi Harris...

Erm... if poly block out 50% of the light and also build up heat then is it still possible to grow droseras tarence? i notice droseras dun do well in heated place... even out door they need wind to cool the heat buildup...

Anyway it's just my 2 cent concern...

Cheerio
Jonathan

Link to Post - Back to Top LoggedA dangerous plant and yet so unique and extraordinary... carnivorous plants.....


hongrui
Advisor - CP

member is offline



CP addict



Joined: Jul 2007
Gender: Male
Posts: 467
Location: Mandai, Singapore
Re: Policarbonate for shading
« Reply #9 on 26 Feb, 2008, 11:26 »
Quote: Thanks AT,

In that case I'll put on some netting together with the poly.


hello!

just to chime in with my view, if you're growing only neps and orchids (from your intro thread), i'd say to skip the polycarbonate and just go with the shade cloth. polycarbonate will block off the rain, which is good only if you have got rain sensitive plants. neps love the rain and i should think most orchids do too.
Link to Post - Back to Top Loggedlooking for different forms of N. ampullaria, N. rafflesiana and N. xhookeriana.

My CP Growlist - updated 27 May '08
hongrui
Advisor - CP

member is offline



CP addict



Joined: Jul 2007
Gender: Male
Posts: 467
Location: Mandai, Singapore
Re: Policarbonate for shading
« Reply #10 on 26 Feb, 2008, 11:35 »
Quote:
Erm... if poly block out 50% of the light and also build up heat then is it still possible to grow droseras tarence? i notice droseras dun do well in heated place... even out door they need wind to cool the heat buildup...


Jonathan,

atmccmn's first post mentioned that polycarbonate (PC) will not take away the heat, but PC will not cause heat to build up. unless its a greenhouse built entirely with PC on all 5 sides.

i'm growing my droserae under a PC shelter, with 4 sides exposed. so there's not much of a temperature difference between the sheltered area or unsheltered area.
« Last Edit: 26 Feb, 2008, 11:36 by hongrui »Link to Post - Back to Top Loggedlooking for different forms of N. ampullaria, N. rafflesiana and N. xhookeriana.

My CP Growlist - updated 27 May '08
tarence
Global Moderator

member is offline





Joined: Apr 2007
Gender: Male
Posts: 1,523
Location: Bandar Kinrara , Puchong
Re: Policarbonate for shading
« Reply #11 on 26 Feb, 2008, 11:40 »Gee hongrui, i was wondering when you`ll be chiming in to offer your comments. heheh.

Jon : i meant the setup as per what hongrui did for his droseras....i think poly permits more light to go thru` than 50% shade cloth tho.
Link to Post - Back to Top Loggedhongrui
Advisor - CP

member is offline



CP addict



Joined: Jul 2007
Gender: Male
Posts: 467
Location: Mandai, Singapore
Re: Policarbonate for shading
« Reply #12 on 26 Feb, 2008, 11:56 »well... you responded to harris within 9mins yesterday ...
hahaha

so i didn't get to chime until this morning mah
Link to Post - Back to Top Loggedlooking for different forms of N. ampullaria, N. rafflesiana and N. xhookeriana.

My CP Growlist - updated 27 May '08
artificialive
Pioneer Member / Global Moderator

member is offline





Joined: Dec 2006
Gender: Male
Posts: 713
Location: Ayer Keroh, Malacca
Re: Policarbonate for shading
« Reply #13 on 26 Feb, 2008, 12:10 »Hi all,
I agree that PC can protect ur plants from rain, but its not good in terms of heat and air flow. I use shadecloth/ black net instead. It lets the air to flow in any direction + filter heavy raindrops to tiny little drops (which does not harm ur droseras). However, i personally let my drosera to tan themselves under the sun without any protection. They seem to be happy even after rain. They are tough plants actually. Predators!
Link to Post - Back to Top Logged[Naj Grow List] --- [Naj Wanted List]harris
New Member

member is offline





Joined: Feb 2008
Gender: Male
Posts: 36
Location: Nibong Tebal
Re: Policarbonate for shading
« Reply #14 on 26 Feb, 2008, 12:15 »Thanks for the advice guys, I really appreciate it.

The poly will only be used for top cover and all 4 sides will be exposed. I've seen a brown coloured poly like the one they usually use at bus stops and planning to use the same one. Maybe I'll use netting on 1 or 2 sides depending on the amount of sun but there'll still be a lot of air flow around. I'm also planning to have automated watering system (got the setup from this website ). For the floor, about 4inches will be raised around the perimeter for me to create somesort of pebble tray to increase humidity.

Currently most of my collection are orchids. I only have 2 pitchers and 2 venus fly traps right now, but I'm already hooked and will be adding more to my collection . In fact has started bidding for some seeds from ebay! For sun loving orchids like vanda, I'm planning to put it closer to the cover/poly and I think I can do the same with droseras since they need full sun. Those that needs less sunlight will be put in middle tier and bottom.

That's the plan anyway. I'll post some photos when the construction starts.

Link to Post - Back to Top LoggedThere is always room for another one...artificialive
Pioneer Member / Global Moderator

member is offline





Joined: Dec 2006
Gender: Male
Posts: 713
Location: Ayer Keroh, Malacca
Re: Policarbonate for shading
« Reply #15 on 26 Feb, 2008, 12:34 »Harris,
Way to go! keep us update on ur project. Some pics will make it more fun and interesting
Mind to share sumthing about the watering system?
Hmm this is a big project i assume
Link to Post - Back to Top Logged[Naj Grow List] --- [Naj Wanted List]harris
New Member

member is offline





Joined: Feb 2008
Gender: Male
Posts: 36
Location: Nibong Tebal
Re: Policarbonate for shading
« Reply #16 on 26 Feb, 2008, 12:46 »Hi,

I get the setup for automatic watering system from:

Projects>DIY-automatic watering system. posted by khairimhd.

Looks easy enought for me to try.


Link to Post - Back to Top LoggedThere is always room for another one...artificialive
Pioneer Member / Global Moderator

member is offline





Joined: Dec 2006
Gender: Male
Posts: 713
Location: Ayer Keroh, Malacca
Re: Policarbonate for shading
« Reply #17 on 26 Feb, 2008, 15:20 »Ooh, thot u got it from other sites
thanks for the clarification.
Link to Post - Back to Top Logged[Naj Grow List] --- [Naj Wanted List]jonathan
Senior Member

member is offline





Joined: May 2007
Gender: Male
Posts: 357
Location: sg buloh
Re: Policarbonate for shading
« Reply #18 on 27 Feb, 2008, 6:19 »
Got it Hongrui & Tarence.... i was just wondering...... Thanks

Regards
Jonathan
Link to Post - Back to Top LoggedA dangerous plant and yet so unique and extraordinary... carnivorous plants.....


Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +9. The time now is 09:25 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Site by David Tan, Founder and Administrator of petpitcher.net and forum.petpitcher.net