My nep "prison" ^_^

[NepNut]

Just sharing some experience for setting up a tiny scale nep "prison". My intention is to setup a place just for L/L neps where it'll be always wet and humid. This place will be fully automated interms of watering via water springkler and mister/fogger powered by water pump and controlled by timer.

Specification :
Dimension : 17ft (width) x 30ft (length) x 9ft (height)

Shading net : Altenate Green (70%) and Black (50%).

Water Tank : 100gal (actual capacity ~80%)

Water pump :
1) Submersible pump - 0.3hp, 0.7 barr pressure to pump water springkler
2) Centrifugal pump (external) - 1hp, 2.5 barr pressure to pump mister/fogger

Springkler Nozzle : 18 pcs

Mister/Fogger Nozzle : 22 pcs (4-way) 10 pcs (1-way)

These are the pics... this project started in early July and it's now completed. I'm in the process of transfering the prisoners... errr plants to the new place now...

Building infrasturcture


I rented a place behind a house if you wondered...
















Structure and Shading - Done !! Next watering system....


Installing Automatic Watering System




Installation - Done !!


Water springkler Nozzel (360 Degress)


4-way Mister/Fogger Nozzle (Pic) [1-way Mister/Fogger Nozzle also used for the outline of this structure]


Testing and commissioning.... trust me you will need an umbrella...


Cleaned up the place and make sure the springkler system is working... at least the floor is wet....


Now the fun part.... misting/fogging test run....
Before.....


After....


Setting up and arranging tables/rack and moving in prisoners.... to be continued.

Thanks for viewing... pls share any comments and ideas, it's my first nep prison.