Read-Only Forum Archive
PetPitcher Forum  

Go Back   PetPitcher Forum > CARNIVOROUS PLANTS > Nepenthes > Nepenthes Propagation

Nepenthes Propagation Projects, information and discussion on propagating Picther Plants



 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 24th November 2011, 08:47 PM
Richard Hole Richard Hole is offline
Full Member
 
Join Date: Thu Sep 2009
Location: Tolga, Australia.
Posts: 88
Default Nepenthes cuttings.

Hello

I am wondering the best way to cut Nepenthes cuttings based on my ideas below. An experienced grower suggested dipping the part of the cutting that goes underground in 75% methylated spirits and 25% water for 30 seconds in order to kill fungi and bacteria. He then suggested to soak the cutting in water before cutting the bottom half inch off as the cutting as it may have absorbed some of the methylated spirits. However cutting half inch off the cutting may mean a node would be wasted if the leaves are close together. This would mean less cuttings could be taken. Perhaps there are other any anti fungal solutions that could be used that would not harm the cutting through absorption so that less than half an inch would need to be cut off. Do you think wettable sulfur could work well or do you have any other suggestions? I want something that is low toxicity and is safe for my skin. Some people suggest rooting hormones. However, I have not used these for years and found cuttings still strike without them. For a root hormone that also kill fungi and bacteria I not sure how toxic they are if they are on your skin for a while. Could that be a problem? Also a fair volume would be needed to dip all the part of the cutting that grows underground and it would be easier if it is a liquid or wettable powder. I read that honey is a powerful germ or bacteria killer and is good for a rooting hormone for cuttings. However, I am not sure how well it would help for Nepenthes cuttings. Please let me know of any trials of this.

Previously I have cut along the thick dark brown lines as shown in the diagram. The upper cut that forms the bottom end of the upper cutting is just below the ridge on the stem formed by the petiole. I am not sure if it would be all right to make this cut higher perhaps where the base of the petiole joins or even above the join. This could be an advantage where the leaves are very close together as it may mean not having to waste a node. How close to the node could I cut?

I cut the petiole (at the base of the cutting) off where it joins the stem so the cut also removes the outer layer of tissue on the stem to expose the meristematic tissue. Just below, (near the bottom end of the cutting) I have been cutting the ridges off along with the outer layer of the stem underneath these ridges to expose the meristematic tissue. I could make these cuts after the cutting is washed and soaked in water after being dipped in the methylated spirits or anti fungal solution. If an antifungal solution can be found that is not harmful if absorbed by the cutting, washing afterwards may not be needed although the cutting may be best washed before the cuts are made in this case. Would it be better to dip the cuttings in the antifungal solution (if it is not harmful if absorbed) or rooting hormone after the final cuts are made and not washing it off? Could the same container of antifungal solution be used for the cuttings from a number of different plants or would it be necessary to make up a new batch for each plant to avoid any contamination?

I grow the cuttings in pure sphagnum moss in a greenhouse under white solarweave plastic that reduces the sunlight by 50%. Foggers mist the foliage so it does not dry out for long if the humidity drops below 80%.

I am wondering if people have had as much success with cuttings that are not buried far into the potting mix? If the nodes are close together several shorter cuttings are possible which would mean more cuttings. However, only about an inch may be in the potting mix if this is the case. What is the minimum depth that has been found to work well?

Also, would it be much of an advantage to strike cuttings on an overcast or wet day when the plants may be less heat stressed than they could be on a warm sunny day with 30 degree heat and 50% humidity?

I grow a number of different carnivorous plants and am interested in swapping them with growers. Most of my plants have a simple self watering wick system to enable easy care. It reduces the risk of the plant drying out. Please see http://www.advantagein.com/cp/ .

Your help would be appreciated,
Regards Richard
Attached Images
File Type: jpg nepenthes stem 5.JPG (30.7 KB, 217 views)
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
cuttings of N.ventrata pwarrior Nepenthes 2 21st February 2010 10:47 AM
Light for Nepenthes cuttings. Richard Hole Nepenthes 11 26th January 2010 05:40 PM
Nepenthes cuttings. Richard Hole Nepenthes Propagation 16 24th January 2010 02:04 AM
New cuttings kentosaurs Nepenthes 18 25th September 2009 01:08 PM
Hoya cuttings shawnintland Foliage Plants 4 16th August 2009 02:02 AM


All times are GMT +9. The time now is 12:15 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Site by David Tan, Founder and Administrator of petpitcher.net and forum.petpitcher.net